TLC-Logo

Sprinkler Inspection in Dallas, TX - Every Zone Tested for Full Coverage

A sprinkler inspection in Dallas evaluates a lawn irrigation system for coverage, function, and backflow protection. TLC Home Inspectors inspects sprinkler systems across Dallas, Fort Worth, Irving, Plano, Garland, and Arlington. The inspection covers zones, heads, the controller, sensors, and the backflow prevention assembly. Landscape irrigation in Texas is regulated by the Texas Commission on Environmental Quality (TCEQ), which licenses irrigators. Call (214) 447-0707 to add a sprinkler inspection to your home inspection.

 
Schedule Your Inspection
Lawn sprinkler sprays water over green grass.

Zone and Coverage Evaluation

A zone and coverage evaluation runs each irrigation zone to confirm operation and spray pattern. This inspection applies to residential systems across the Dallas-Fort Worth area. The inspector activates each zone and observes the heads for coverage and obstruction.

 

An irrigation system divides the yard into zones, each controlled by a valve and served by a set of heads. The inspector runs each zone from the controller and documents heads that fail to pop up, spray off target, or overspray onto pavement. Findings identify dry spots and wasted water.

  • Activate each zone from the controller
  • Observe head operation and spray pattern
  • Document heads that fail or spray off target
  • Identify dry spots and overspray onto pavement

A coverage evaluation identifies the heads and zones that waste water or leave dry spots.

Controller and Sensors

A controller and sensor inspection evaluates the timer and any rain or freeze sensors. This inspection applies to the control equipment that schedules irrigation. The inspector reviews the programming and confirms that sensors interrupt watering when conditions warrant.

 

The controller schedules each zone by day, time, and duration, and a rain or freeze sensor overrides the schedule during rain or cold. The inspector confirms the controller powers on, advances through zones, and responds to a sensor. A working sensor supports water conservation and follows local watering guidance.

  • Confirm the controller powers on and advances zones
  • Review the watering schedule and durations
  • Test rain and freeze sensor response
  • Note settings that support water conservation

A controller inspection confirms the system waters on schedule and pauses during rain or freeze.

A lawn sprinkler spraying water over green grass as part of a residential irrigation system during dry weather

Backflow Prevention

A backflow prevention inspection evaluates the assembly that protects the drinking water supply. This inspection applies to irrigation systems connected to a potable water source. A backflow prevention assembly keeps irrigation water from flowing back into the household supply.

Irrigation systems connect to the potable water supply, so a backflow prevention assembly is required to protect drinking water. The inspector documents the assembly type and its visible condition. TCEQ rules address backflow assembly testing, so the report recommends testing by a licensed professional.

  • Identify the backflow prevention assembly
  • Document the assembly type and condition
  • Note leaks or damage at the assembly
  • Recommend testing by a licensed professional

A backflow inspection documents the assembly that protects drinking water from irrigation cross-connection.

A person adjusting a sprinkler head while water sprays onto a landscaped area.

Leaks and Efficiency

A leak and efficiency check identifies water loss and inefficient watering. This inspection applies to systems across Dallas, where summer heat and watering guidance make efficiency important. The inspector looks for leaks at heads, valves, and lines.

 

Leaks appear as pooling water, soft ground, or heads that seep between cycles. The inspector documents leaks, broken heads, and mismatched heads that reduce efficiency. Findings support repairs that lower water use during the long Dallas irrigation season.

  • Locate leaks at heads, valves, and lines
  • Document broken and mismatched heads
  • Identify pooling and soft ground
  • Recommend repairs that reduce water use

An efficiency check finds the leaks and broken heads that raise water use during the Dallas summer.

Signs You Need a Sprinkler Inspection in Dallas

6 signs indicate a Dallas sprinkler system needs an inspection. Each points to a coverage, control, or leak concern.

Dry or brown spots in the lawn

suggest poor coverage or failed heads.

Pooling water or soft ground

indicates a leak in a line or valve.

Sloping or uneven floors

indicate foundation settlement that warrants further evaluation.

A controller that skips zones

signals a wiring or valve problem.

No rain or freeze sensor response

wastes water during rain and cold.

Buying a home with an existing system

warrants a full evaluation before closing.

Our 5-Step Sprinkler Inspection Process

01

Schedule the inspection

Call (214) 447-0707 to add a sprinkler inspection to a home inspection or order it separately.

02

Run each zone

Activate the zones from the controller and observe head operation.

03

Check controls

Review the schedule and test rain and freeze sensors.

04

Inspect backflow

Document the backflow assembly and recommend testing.

05

Deliver the report

Provide documented findings with photos of each concern.

Schedule your Dallas home inspection

Add a sprinkler inspection to your Dallas home inspection with TLC Home Inspectors.

 

Home Inspection Coverage vs. Dedicated Sprinkler Inspection

Dallas buyers choose between the optional sprinkler review in a standard inspection and a dedicated irrigation inspection. The comparison below outlines the difference.
Attribute Standard Inspection Coverage Dedicated Sprinkler Inspection
Scope
Optional sprinkler review
Full zone, control, and backflow review
Zones
General operation check
Each zone run and documented
Controls
Basic controller check
Schedule and sensor testing
Backflow
Noted if visible
Assembly documented, testing advised
Best for
Simple systems
Larger or multi-zone systems

 

Choose the optional review for a basic check within the home inspection. Choose a dedicated sprinkler inspection for a full evaluation of zones, controls, and backflow. A dedicated inspection is valuable for larger multi-zone systems.

Who We Serve

Homebuyers

Homebuyers add a sprinkler inspection to document an irrigation system before closing. Buyers across Dallas rely on the inspection to confirm coverage and function. The report supports repair requests during the option period. A clear inspection protects the purchase.

Homeowners

Homeowners use a sprinkler inspection to reduce water use and fix coverage problems. Owners across the metroplex rely on the inspection to find leaks and broken heads. The report guides efficient repairs. Lower water use supports conservation goals.

Home Sellers

Home sellers use a sprinkler inspection to document the system before listing. Sellers across Dallas-Fort Worth rely on the report to disclose condition and address issues in advance. Early action keeps the sale on schedule. Documentation reduces surprises.

Property Managers

Property managers use sprinkler inspections to plan landscape maintenance. Managers across the metroplex rely on documented condition to budget repairs. The report prioritizes coverage, control, and backflow items. Scheduled inspections support long-term upkeep.

Why Choose TLC Home Inspectors

TLC Home Inspectors inspects sprinkler systems across Dallas, Fort Worth, and the surrounding metroplex. Lawn sprinklers are an optional system under the TREC Standards of Practice, and irrigation in Texas is regulated by the Texas Commission on Environmental Quality.

The following credentials apply to the Dallas team. Confirm and insert verified details before publishing.

  • TREC licensed inspector qualified for optional sprinkler systems
  • TCEQ licensed irrigator credentials #22521
  • 30 years inspecting irrigation systems in Dallas-Fort Worth
  • 10,000 sprinkler inspections completed in the metroplex
  • General liability and errors and omissions coverage $100,000

Contact TLC Home Inspectors at (214) 447-0707 to confirm current credentials and availability.

Home inspector checks an interior surface with a client watching.

Frequently Asked Questions

A Texas home inspection includes structural, electrical, HVAC, plumbing, appliance, and optional systems under the TREC Standards of Practice. The inspector documents deficiencies on the REI 7-6 Property Inspection Report Form. Optional systems such as sprinklers and pools are added on request.

The Texas Commission on Environmental Quality (TCEQ) regulates landscape irrigation and licenses irrigators in Texas. TCEQ rules address backflow prevention that protects the drinking water supply. Ask about irrigation credentials before scheduling.

A backflow prevention assembly keeps irrigation water from flowing back into the drinking water supply. The assembly protects potable water at the connection point. The inspection documents its condition and recommends testing by a licensed professional.

A lawn sprinkler system is an optional system under the TREC Standards of Practice and is added to the home inspection on request. The optional review provides a general check. A dedicated inspection covers zones, controls, and backflow in more detail.

Schedule the inspection during the option period, alongside the home inspection, so findings are available before the deadline. Early scheduling allows time to evaluate repairs. Call (214) 447-0707 to add a sprinkler inspection.

Map of North Texas showing the TLC service area, highlighted in teal. It covers four counties: Denton County in the northwest, Collin County in the northeast, Tarrant County in the southwest, and Dallas County in the southeast. Labeled markers point to Fort Worth in Tarrant County, Dallas in Dallas County, and Plano in Collin County.

Service Area

  • Dallas
  • Fort Worth
  • Irving
  • Plano
  • Garland
  • Arlington
  • Grand Prairie
  • Mesquite
  • Richardson
  • Carrollton
  • Rowlett
  • Addison
  • Farmers Branch
  • Coppell
  • DeSoto
  • Cedar Hill
  • Duncanville
  • Grapevine
  • Dallas County
  • Tarrant County
  • Collin County
  • Denton County

Zip Codes: 75201, 75202, 75203, 75204, 75205, 75206, 75208, 75209, 75210, 75212, 75214, 75216, 75218, 75219, 75220, 75223, 75225, 75227, 75228, 75229, 75230, 75231, 75235, 75238, 75240, 75243, 75244, 75248, 75252, 75254, 75060, 75061, 75062, 75040, 75042, 75043, 75023, 75074, 75075, 76010, 76011, 76013, 76102, 76104, 76107